2016 Chevrolet Camaro Complaints

POWER TRAIN — Filed 10/06/2025

The contact owns a 2016 Chevrolet Camaro. The contact stated that while driving at various speeds, the transmission unexpectedly shifted from first gear to third gear, the vehicle shuddered abnormally, and then jolted into the next gear. The failure also occurred while the transmission was downshifting. There was no warning light illuminated. The vehicle was taken to a local dealer, where it was diagnosed, and it was determined that the torque converter needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 32,670.

STEERING,UNKNOWN OR OTHER — Filed 05/01/2021

Power Steering and stabilitrack keeps popping off on my dashboard. Took it to service at Chevy dealer but they couldn’t seems to find any problem even when they see the issue.

STEERING — Filed 01/28/2026

The contact owns a 2016 Chevrolet Camaro. The contact stated that while driving at 15 MPH, the vehicle lost power steering functionality, requiring the contact to use excessive force to steer the vehicle. The contact stated that upon replacing the battery, the power steering feature returned for one day before the failure returned. While the vehicle was idling, the contact attempted to turn the steering wheel, and the message "Power Steering Assist Unavailable - Drive Safely" was displayed. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact related the failure to NHTSA Campaign Numbers: 25V175000 (Steering) and 19V086000 (Steering); however, the model year was not included in the recall. The manufacturer was notified of the failure and informed the contact that the VIN was not included in the recalls. The failure mileage was approximately 47,204.

POWER TRAIN,ENGINE — Filed 11/24/2025

The contact owns a 2016 Chevrolet Camaro. The contact stated that on the same day that the vehicle was purchased, the vehicle experienced a failure. The contact stated that while attempting to start the vehicle, the vehicle failed to immediately start-up. The dealer, Flori Auto Sales LLC, was contacted, and the dealer towed the vehicle to the dealer, where it was diagnosed with starter failure. The vehicle was repaired. The contact stated that on a separate occasion, the check engine warning light illuminated. The contact took the vehicle to Auto Zone, where it was diagnosed, and determined that the Transmission Fluid Temperature (TFT) Sensor "A" had failed. The vehicle was not repaired. The contact called an independent mechanic and was informed that the dealer needed to repair the vehicle. The vehicle was taken to the dealer. Once the vehicle was at the dealer, an employee used a handheld scanner, and the check engine warning light was no longer illuminated. The dealer informed the contact that the vehicle was repaired, and an emissions test was conducted without the contact's permission. The contact took the vehicle back to the residence. The contact stated that the cooling fan failed to function as intended. No warning lights were illuminated. The vehicle was taken to Auto Zone, and the contact was informed that DTC: P0128 and P0811were retrieved; however, the warning lights were no longer illuminated. The contact took the vehicle to an emissions testing center and was informed that the Transmission Fluid Temperature (TFT) Sensor "A" had failed and had not been repaired. The contact was informed that the vehicle had passed the emission test; however, a failure was present, and the vehicle should not have passed the test. The manufacturer was not made aware of the failure. The failure mileage was 185,100.

STEERING,ELECTRICAL SYSTEM — Filed 11/21/2024

The contact owns a 2016 Chevrolet Camaro. The contact stated that while driving over the train tracks at an undisclosed speed, the contact noticed that there was smoke and a burning odor coming through the vents. The check engine warning light was illuminated. The contact pulled over to the side of the road. The contact opened the hood and inspected the engine compartment, but the contact could not find the origin of the burning odor. The vehicle was towed to the residence, where the contact discovered that the smoke and the burning odor were coming from the starter that was 3 inches away from the exhaust manifold, by design. The contact purchased the starter from the dealer, and the contact replaced the starter; however, the failure persisted. The contact then noticed that the wires and the wiring harness of the starter were severely burned. The contact purchased the wires and the wiring harness from the dealer. The contact replaced the starter, the wires, and the wiring harness, and installed a custom-made heat shield between the starter and the exhaust manifold. Additionally, the contact stated that the steering wheel had failed to lock after turning off the vehicle. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 59,000. The VIN was not available.

POWER TRAIN,ENGINE — Filed 10/29/2025

Engine revs without touching the gas pedal . Intermittent hard shifting

STEERING — Filed 10/15/2025

I expereinced sudden and complete loss of Electric Power Steering Assist. A warning ,message appeared on dash notification area that power steering assist had failed. I understand that this is a known problem that has been recalled for this model, but my VIN was not included in that recall. I was travelling at 60 MPH at the time and narrowly avoiding losing control and crashing the vehicle. After stopping and restarting the car, the problem went away and then appeared again 2 days later. I am not confident that it will not happen again. The existing recall must be expanded to include my vehicle and possibly many other vins.

ENGINE — Filed 02/28/2019

The component that failed is the 8-speed automatic transmission and torque converter on my 2016 Chevrolet Camaro SS. The system experienced shuddering, slipping, and overheating, leading to unsafe driving conditions. The defective parts are no longer available for inspection because they are being replaced through a dealership service center, but the vehicle and records of prior repairs are available upon request. My safety and the safety of others were put at risk because the transmission caused hesitation, loss of power during acceleration, and unpredictable shifting. This created dangerous situations in traffic where the car failed to respond as expected. The problem has been confirmed and reproduced by authorized GM dealers during multiple visits. They have identified overheating and failure codes related to the transmission and torque converter. The vehicle has been inspected by the manufacturer’s authorized service center (Chevrolet dealer) but not by police or insurance representatives. There were warning symptoms before the failure, including: Noticeable shuddering during acceleration Hard shifting, particularly in lower gears Transmission overheating codes detected by the dealership These symptoms first appeared at approximately 35000 miles and have recurred despite prior repairs under warranty.

ELECTRICAL SYSTEM,LANE DEPARTURE — Filed 05/30/2025

The blind spot warning system stopped working, and yes it is available for inspection upon request. I have heard this leads to further electrical problems and am worried this may compromise my safety if not dealt with. The problem has not been confirmed by a dealer. The component has not been inspected. There was a warning that popped up stating “service side detection system” that appeared randomly on my drive home the other day. I had not hit anything or done anything to the car that might have caused this. After a couple of rain storms, it appears that this is directly related to water intrusion.

POWER TRAIN — Filed 06/02/2025

The torque converter on my vehicle is faulty. It has a violent shake, slippage of gears, and sometimes even loss of power while driving. Sometimes the violent vibrations cause me to have to slow down abruptly amongst traffic. Several mechanic have identified the torque converter as the problem.